Tuesday, June 7, 2011

Saturday, June 4, 2011

Mock Up

 S&S Super E still needs polishing
 Drag Pipes will also need new clamps and may get "Cut and Shut" to raise them up a little.....or a lot ;-)
Just mocked up with the front fender to see how it looks, I have ordered a  Brit style 5" alloy fender, that will sit in a similar position but will go further back over the wheel and be braced with a brass fender stay bar.

Wednesday, May 18, 2011

Sprin 2010



Frisco Tank Build #2












Pictures say so much more then words. Just Mocked up I have weld it up nice and petrol tight ;-) maybe easier said then done

Thursday, May 12, 2011

Frisco, Sportster Tank Build #1

 Paper Template
 Cut out of some old Tank?
 Clean it Up
 Try it for Fit
 Spot Weld
My welding may not be getting any better but I am getting a lot of practice Grinding ;-)

Wednesday, May 11, 2011

Evo Sportster Front Brake Pads

This was an absolute mother to get out, ended up having to take the brake off and use the impact driver with a lump hammer! make sure you have the brake supported on a piece of wood to save it from damage.


Pads were down to the limit, nice touch is the backing plates, their little tabs make a sound to tell you the pads have reached their limit. Not shown as I could not stop to make more photos as it started to rain and I was out the front of the house.

 Note old screw is back in till I get a new one ;) That Disc needs cleaning and painting me thinks. The one grip I have with me Evo Sportster is the lack of resistance to Irish Rain :-(