The New Artificial Vision Productions Logo

Pignose

So after carting the broken Pignose around for about 10 years I finally opened it up and found that three of the contacts from one of the transformers had snapped in a fall maybe? a little solder and cleaning of all the contacts and my little BABY is back :) Neighbours Beware

Electrics Box Mounting Bracket

A Very Nice Ironhead Bobber

Here is the Reason the Ironhead was on Hold. DIY Citroen Berlingo Micro Camper

Hard wired the smart relay so charging priority is to the main battery first then the leisure battery

Don't worry I will hard wire the 350watt inverter, mostly for laptop and camera battery charging

Cooler and deck chairs and plenty of more room for more crap ;)

The Sofa and Coffee Table

Another view of the living room

Rear Storage, Food box, 2 ring and Grill Cooker and Gas

For quick meals, but will go outside on a table, weather permitting

Welcome to the Bedroom, 6 feet 6 Inch by 4 foot Bed, with 4 Inch foam

Time to go traveling

Sheldon in his new Castle

1975 Harley Sportster rear brake shoes

VW Air Filter for Screamin Eagle Carb

Arlen Ness Regulator

More Bolt-on Hardtails #7

Tjolkman Sporty from the Netherlands

Tjolkman Sporty from the Netherlands

Tjolkman Sporty from the Netherlands

Tjolkman Sporty from the Netherlands

Is that just Sweet or What?

The 59 Clubs Motorcyclists Prayer

Father Bill Shergold and the 59 Club

Wow and that was in 59! With traffic the way it is now we need this even more now

Father Bill Shergold said he tried to instill in the members of the 59 Club that they were the Knights of the road and should behave in a chivalrous manner.

I lived in the UK for years and I can tell you that there is a very strong brotherhood of two wheels, Bikers and Scooterist are always willing to stop and help no matter where or what the weather. I think that all started with this unusual man.

Warm Weather at Last. Kickstarter, 1975 XLCH 1000 Sportster, It just had to happen "!6&$)(*~@?"

  First day here in Ireland that it has been warm enough to get into the workshop without tools sticking to my hands. The main focus is now on getting the Engine Running. I need to wire the electrics fit the Coils. Generator and Regulator. Plumb the oil lines and set up a fuel supply.

  Today was Exhausts and Kick starter. I finally got the two blots to secure the kicker/Sprocket cover plate fitted the exhausts, I still need to tie down the end of each to the frame.
Put the Kick start Spring on and the Kick start Pedal then one kick and 

   I got on to Fleabay there were two for sale and ordered a new one, from these guys, as usual with everything for me Ironhead the shipping costs more then the part :(

At least I can get on with the rest of the list ;)